The display is showing P/F or Prb Flt
This refers to “Probe Fault” and means that the reading the press is getting from your heat probe is not what it expects it to be. Generally, this means that the heat probe is faulty (part no. XP7010RP / FP3057/5) and needs replacing.
It is worth checking that the heat probe is plugged in to the board correctly and that there is no damage to the wiring loom that goes towards the heat plate (This is a bundle of white wires surrounded by a plastic coil that goes down into the cable post and to the heat plate).
If there is no obvious sign of damage, unfortunately the press may require a repair and it is recommended that this is carried out by an Adkins technician. Please contact your Adkins dealer or Adkins support.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article